保定绝缘件生产加工厂

1.环境要求

1. Environmental requirements

温度：存放温度适宜16～29℃；长期保存不会变形。

Temperature: storage temperature for 16 ~ 29 ℃; Long-term preservation will not deformation.

相对湿度：≤65%RH（RH-相对湿度的英文）；绝缘件造型、形状的定型。

Relative humidity: 65% RH or less (RH - relative humidity in English); Insulation modelling, shape, finalize the design.

通风：一般性无风自然循环环境；以免引起落尘及变形。

Ventilation: general calm natural circulation environment; Lest cause dust fall and deformation.

照射：防止阳光直射，绝缘加工车间窗户抬高；避免老化和变形。

Light: avoid direct sunlight, insulation processing shop Windows up; Avoid aging and deformation.

降尘量：控制；绝缘件存放室防尘控制，及绝缘件防尘覆盖。

Heavy: control; Insulation parts storage room dust control, and insulation dustproof cover.

作业用水：绝缘件弯制作业需要用水时；仅允许用纯净水、蒸馏水，不得使用矿物质水及自来水等。

Homework: water insulation parts bending manufacturing need water; Only allow use pure water, distilled water, mineral water and tap water should not be used.

2.加工要求

2. The processing requirements

配变绝缘件棱边可不做倒圆要求。

With insulating edge can not do it is round.

垫块成型绝缘件表面、加工面不应有加工碳化痕迹，这类材料往往用在端部的复杂电场下，加工碳化痕迹会影响沿面爬电性能。

Block forming on the surface of the insulation, machining surface should not have trace carbide, this kind of material is often used in the end of the complex electric field, the creepage performance will affect the machining carbide trace along the surface.

绝缘件表面应光滑无加工锯齿状痕迹，粗糙会引起尺寸偏差不稳。

Insulation parts surface should be smooth without machining serrated trace, rough will cause unstable dimension deviation.